MOQ : 400 Litre
Business Type : Manufacturer, Exporter, Supplier
|PH value||9 to 10|
|Specific Gravity||1.05 +/- 0.05 kg/ltr|
|Solid Content||46 +/- 0.5 %|
|Brand Name||Star Paints|
Preferred Buyer From
|Location||Anywhere in India|
SP-Bond is a Modified Acrylic Polymer specially designed for cementation composition. Cement Mortar modified with SP-Bond are hard, tough and durable. It has excellent adhesion to variety of surface such as concrete masonry, brick etc.
Direction for use:
Remove loose plaster if any all the cracks above 0.7mm width should be proper sealed. The surface should structurally sound and free from oil, grease loose particles. Mix 1.5 kg of cement (grey/white) with 1 kg of polymer thoroughly and add little quantity of water into the mixture to make homogenous liquid paste and apply by brush or roller on the surface.
Cement Mortar with SP-Bond has excellent abrasion resistance bonding and impact strength. It has excellent waterproofing capacity and widely used for waterproofing floors, roof tops, basement etc. Mortar modified with SP-Bond has improved physical strength and superior adhesion to concrete. It can also be used for crack filling. Cement mortar with SP-Bond does not require wet curing as SP-Bond hold the water in the system Sufficient for cement curing. Mortar with SP-bond has excellent corrosion resistance which protect rusty as well as clean metal. The pot life of cement mortar with SP-BOND is 4 hours
|Sr No.||Type of Usage||Area||URP/SBP(in Kg)||Cement (in kg)||Sand(in Kg)||Aggregate(in Kg)||Coverage||Usage of polymer in kg|
|1||Bonding agent[for coating]||Before any kind of repair||SP-COAT 1||1 to 1.5||N.A||N.A||40-50sq.ft/coat||Bond coat :2kg (50kg for 1000sq.ft)|
|2||Wall concrete repair mortor||Minor cracks in columns,beams, chajjas, parpet,slab repair, balcony||SP-Bond of 10-15% of cement wt||1 part||1.5part||1.5part||7sq.ft@25mm thick||Concrete repair mortar-15kg at 25mm thickness.|
|3||Wall plaster repair mortor||Boolean plaster, plaster cracks,columns and beams,joints, drainage pipe & wall joints.||SP-Bond (10-15% of cement wt)||1 part||3 part||N.A||7sq.ft of 25mm||Plaster repair mortor-15kg at 25mm thickness.|