Alkyd Based Primer

Features :

• A durable Matt Finish Coat.
• Known for Excellent Rust Preventing Coating.
• Tough, Durable.
• Ease of application, can be applied by brush, roller or spray.
• Good resistance to impact and abrasion
• Good opacity and better hiding power
• Can be applied on mild steel, other metallic surfaces.

Area of Application :

• Machinery equipments
• MS Drums
• Structures
• Containers
• Cabins
• Scaffolding pipes
• Pipeline
• Metal furniture
• Collapsible gates, grills, gates, etc.

Direction For Use :

Surface Preparation :
Surface to be painted should be dry and free from oil, greese, dust, rust and other contaminants. This can be done by wire...

Features :

• A durable Matt Finish Coat.
• Known for Excellent Rust Preventing Coating.
• Tough, Durable.
• Ease of application, can be applied by brush, roller or spray.
• Good resistance to impact and abrasion
• Good opacity and better hiding power
• Can be applied on mild steel, other metallic surfaces.

Area of Application :

• Machinery equipments
• MS Drums
• Structures
• Containers
• Cabins
• Scaffolding pipes
• Pipeline
• Metal furniture
• Collapsible gates, grills, gates, etc.

Direction For Use :

Surface Preparation :
Surface to be painted should be dry and free from oil, greese, dust, rust and other contaminants. This can be done by wire brush, Emery Paper, Scrapping Tools.

Priming :
Apply1 TO 2 Coats of SP-ZINC CHRO 11 On Surface as per requirement after surface preparation with Interval of overnight. Sand the Surface and wipe it clean.

Top Coat Application :
Then Apply top coat with interval of overnight. Apply minimum 2 Coats on surface.

Application Method :

• By airless spray- Tip size: 0.015-0.017 inches
• Pressure: 150 kg/ sq. cm (2100 P.S.I)
• Conventional air spray : can also be used
• Roller or brush : can also be used. However, additional coats may be required to be applied to get desired DFT. This method of application is suitable at weld-seams, edges, corners, rivets, Stripe coating etc.

Special instruction:

• Do not apply the paint if the temperature is less than 10 degree.
• Do not overthin the paint
• Stir well before use
• keep the container tightly closed and away from direct sunlight.
• In case of contact with use plenty of water and take medical advice if irritation persists.

Drying Time

• SD- Approx. 1 Hours at 30 Degree Centigrade
• HD- Approx. 6-8 Hours at 30 Degree Centigrade
• TF- Overnight

“SP-ZINC PHOS 11” is a Single Pack Alkyd based Zinc Phosphate Pigmented Primer suitably for mild  or moderate environments. It Gives Matt, Tough,Excellent Rust Preventing Coating, Good Abrasion Resistance, Good Chemical Resistance, Good Impact Resistance, Good Flexibility. It Also Helps In increasing the covering of final coat and acts as grip to final finish coat thus ensures better adhesion.

Features :

• A durable Matt Finish Coat.
• Known for Excellent Rust Preventing Coating.
• Tough, Durable.
• Ease of application, can be applied by brush, roller or spray.
• Good resistance to impact and abrasion
• Good opacity and better hiding power.
• Can be applied on mild steel, other metallic surfaces.

Area of Application :

• Ma...

“SP-ZINC PHOS 11” is a Single Pack Alkyd based Zinc Phosphate Pigmented Primer suitably for mild  or moderate environments. It Gives Matt, Tough,Excellent Rust Preventing Coating, Good Abrasion Resistance, Good Chemical Resistance, Good Impact Resistance, Good Flexibility. It Also Helps In increasing the covering of final coat and acts as grip to final finish coat thus ensures better adhesion.

Features :

• A durable Matt Finish Coat.
• Known for Excellent Rust Preventing Coating.
• Tough, Durable.
• Ease of application, can be applied by brush, roller or spray.
• Good resistance to impact and abrasion
• Good opacity and better hiding power.
• Can be applied on mild steel, other metallic surfaces.

Area of Application :

• Machinery equipments.
• MS Drums
• Structures
• Containers
• Cabins
• Scaffolding pipes
• Pipeline
• Metal furniture
• Collapsible gates, grills, gates, etc.

Direction For Use :

Surface Preparation :
Surface to be painted should be dry and free from oil, greese, dust, rust and other contaminants. This can be done by wire brush, Emery Paper, Scrapping Tools.

Priming :
Apply 1 TO 2 Coats of SP-ZINC PHOS 11 On Surface as per requirement after surface preparation with Interval of overnight. Sand the Surface and wipe it clean.

Top Coat Application :
Then Apply top coat with interval of overnight. Apply minimum 2 Coats on surface.

Application Method :

• By airless spray- Tip size : 0.015-0.017 inches
• Pressure : 150 kg/ sq. cm (2100 P.S.I)
• Conventional air spray : can also be used
• Roller or brush : can also be used. However, additional coats may be required to be applied to get desired DFT. This method of application is suitable at weld-seams, edges, corners, rivets, Stripe coating etc.

Special instruction :

• Do not apply the paint if the temperature is less than 10 degree.
• Do not overthin the paint
• Stir well before use
• keep the container tightly closed and away from direct sunlight.
• In case of contact with use plenty of water and take medical advice if irritation persists.

Drying Time

• SD- Approx. 1 Hours at 30 Degree Centigrade
• HD- Approx. 6-8 Hours at 30 Degree Centigrade
• TF- Overnight

“SP- PRIMO 11” is a Single Pack Alkyd based Primer suitably pigmented with micro fine redoxide and extenders. Ideal for ferrous metal surface. It Gives Matt, Tough, Rust Preventing Coating, Good Abrasion Resistance, Good Chemical Resistance, Good Impact Resistance, Good Flexibility. It Also Helps In increasing the covering of final coat and acts as grip to final finish coat thus ensures better adhesion.

Features :

• A durable Matt Finish Coat.
• Economical Primer
• Tough, Rust preventing coating.
• Ease of application, can be applied by brush, roller or spray.
• Good resistance to impact and abrasion
• Good opacity and better hiding power.
• Can be applied on mild steel, other metallic surfaces.

Area of Application :