Epoxy Anti Corrosive Primer

It is Two Pack Polyamide Cured Solvent Based  Epoxy Anticorrosive Primer pigmented with zinc chromate as a rust inhibitors .It is recommended for all the gates to keep them rust free. It is Strong, Versatile, Excellent Rust Preventing Coating, Good Abrasion Resistance, Excellent Chemical Resistance, Good Impact Resistance and Excellent Flexibility. It gives superior hiding power and provides grip to the final coat.

Features :

• A durable Finish Coat
• Epoxy system is popular in anti-rust primer
• Approx. 40 times stronger than regular alkyd primer.
• Good resistance to marine and chemical environments.
• Can be top coated with epoxy, chlorinated rubber, acrylic, poly urethane finish paints
• Tough, Rust preventing coating.
• Ease of application, can be applied by brush, roller or spray.
• High res...

It is Two Pack Polyamide Cured Solvent Based  Epoxy Anticorrosive Primer pigmented with zinc chromate as a rust inhibitors .It is recommended for all the gates to keep them rust free. It is Strong, Versatile, Excellent Rust Preventing Coating, Good Abrasion Resistance, Excellent Chemical Resistance, Good Impact Resistance and Excellent Flexibility. It gives superior hiding power and provides grip to the final coat.

Features :

• A durable Finish Coat
• Epoxy system is popular in anti-rust primer
• Approx. 40 times stronger than regular alkyd primer.
• Good resistance to marine and chemical environments.
• Can be top coated with epoxy, chlorinated rubber, acrylic, poly urethane finish paints
• Tough, Rust preventing coating.
• Ease of application, can be applied by brush, roller or spray.
• High resistance to impact and abrasion
• Resistance to spillage or splashes of mild chemicals.

Area of Application :

• Recommended for Protection of Structural Steel, Aluminum.
• Equipment and Machinery.
• Reaction Kettle and Vessel.
• Containers And Cabins.
• Conveyer System.
• Pipe Lines and Storage Tank
• Exterior in Chemical and Saline environments.

Direction For Use :

• Surface Preparation:Surface to be painted should be dry and free from oil, grease, dust, rust and other contaminants. This can be done by wire brush, Emery Paper, Scrapping Tools. Recommended and most suitable method is to sand blast S 205 of Swedish specification.
• Priming:Firstly mix the base and hardener of epoxy primer as per specified mixing ratio and mix thoroughly to get uniform homogeneous mixture and then add thinner if required. Use SP-Epoxy thinner only. Apply 2 Coats of Primer On Surface after surface preparation with Interval of overnight. Sand the Surface and wipe it clean.
• Top Coat Application :Apply top coat with interval of overnight. Apply minimum 2 Coats on surface.

Application Method :

• By airless spray-Tip size : 0.28-0.33 mm
• Tip size : 0.28-0.33 mm
• Conventional air spray : Tip Size: 1.5-3.0 mm
• Pressure : 0.3-0.4 MPa ( 43-57 p.s.i)
• Roller or brush : can also be used. However, additional coats may be required to be applied to get desired DFT. This method of application is suitable at weld-seams, edges, corners, rivets, Stripe coating etc.

Special instruction :

• Do not apply the paint if the temperature is less than 10 degree
• Do not overthin the paint
• Stir well before use
• keep the container tightly closed and away from direct sunlight.
• In case of contact with use plenty of water and take medical advice if irritation persists.

Drying Time :

• SD- Approx. 2 Hours at 30 Degree Centigrade.
• HD- Approx. 16 Hours at 30 Degree Centigrade

It is Two Pack Polyamide Cured Solvent Based  Epoxy Anticorrosive Primer pigmented with zinc Phosphate as a rust inhibitors .It is recommended for all the gates to keep them rust free. It is Strong, Versatile, Excellent Rust Preventing Coating, Good Abrasion Resistance, Excellent Chemical Resistance, Good Impact Resistance and Excellent Flexibility. It gives superior hiding power and provides grip to the final coat.

Features :

• A durable Finish Coat
• Epoxy system is popular in anti-rust primer
• Approx. 40 times stronger than regular alkyd primer.
• Good resistance to marine and chemical environments.
• Can be top coated with epoxy, chlorinated rubber, acrylic, poly urethane finish paints
• Tough, Rust preventing coating.
• Ease of application, can be applied by brush, roller or spray.
• H...

It is Two Pack Polyamide Cured Solvent Based  Epoxy Anticorrosive Primer pigmented with zinc Phosphate as a rust inhibitors .It is recommended for all the gates to keep them rust free. It is Strong, Versatile, Excellent Rust Preventing Coating, Good Abrasion Resistance, Excellent Chemical Resistance, Good Impact Resistance and Excellent Flexibility. It gives superior hiding power and provides grip to the final coat.

Features :

• A durable Finish Coat
• Epoxy system is popular in anti-rust primer
• Approx. 40 times stronger than regular alkyd primer.
• Good resistance to marine and chemical environments.
• Can be top coated with epoxy, chlorinated rubber, acrylic, poly urethane finish paints
• Tough, Rust preventing coating.
• Ease of application, can be applied by brush, roller or spray.
• High resistance to impact and abrasion
• Resistance to spillage or splashes of mild chemicals.

Area of Application :

• Recommended for Protection of Structural Steel, Aluminum.
• Equipment and Machinery.
• Reaction Kettle and Vessel.
• Containers And Cabins.
• Conveyer System.
• Pipe Lines and Storage Tank
• Exterior in Chemical and Saline environments.

Direction For Use :
Surface Preparation : Surface to be painted should be dry and free from oil, grease, dust, rust and other contaminants. This can be done by wire brush, Emery Paper, Scrapping Tools. Recommended and most suitable method is to sand blast S 205 of Swedish specification.

Priming : Firstly mix the base and hardener of epoxy primer as per specified mixing ratio and mix thoroughly to get uniform homogeneous mixture and then add thinner if required. Use SP-Epoxy thinner only. Apply 2 Coats of Primer On Surface after surface preparation with Interval of overnight. Sand the Surface and wipe it clean.

Top Coat Application : Apply top coat with interval of overnight. Apply minimum 2 Coats on surface.

Application Method :

• By airless spray-Tip size : 0.28-0.33 mm
• Pressure : 10-13 MPa (1400-1800 p.s.i)
• Conventional air spray : Tip Size: 1.5-3.0 mm
• Pressure : 0.3-0.4 MPa ( 43-57 p.s.i)
• Roller or brush : can also be used. However, additional coats may be required to be applied to get desired DFT. This method of application is suitable at weld-seams, edges, corners, rivets, Stripe coating etc.

Special instruction :

• Do not apply the paint if the temperature is less than 10 degree.
• Do not overthin the paint
• Stir well before use
• keep the container tightly closed and away from direct sunlight.
• In case of contact with use plenty of water and take medical advice if irritation persists.

Drying Time

• SD- Approx. 2 Hours at 30 Degree Centigrade.
• HD- Approx. 18 Hours at 30 Degree Centigrade