Latest Products https://www.starpaints.in Latest Products Fri, 23 Jul 2021 23:37:50 +0530 en-us https://www.starpaints.in Alkyd Based Enamel Paint https://www.starpaints.in/alkyd-based-enamel-paint.htm https://www.starpaints.in/alkyd-based-enamel-paint.htm Wed, 05 Feb 2020 00:00:00 +0530 Alkyd Based Primer https://www.starpaints.in/alkyd-based-primer.htm https://www.starpaints.in/alkyd-based-primer.htm Wed, 05 Feb 2020 00:00:00 +0530 Chlorinated Rubber Paint and Primer https://www.starpaints.in/chlorinated-rubber-paint-and-primer.htm https://www.starpaints.in/chlorinated-rubber-paint-and-primer.htm Wed, 05 Feb 2020 00:00:00 +0530 Epoxy Anti Corrosive Paint https://www.starpaints.in/epoxy-anti-corrosive-paint.htm https://www.starpaints.in/epoxy-anti-corrosive-paint.htm Wed, 05 Feb 2020 00:00:00 +0530 Epoxy Anti Corrosive Primer https://www.starpaints.in/epoxy-anti-corrosive-primer.htm https://www.starpaints.in/epoxy-anti-corrosive-primer.htm Wed, 05 Feb 2020 00:00:00 +0530 Quick Drying Paints and Primers https://www.starpaints.in/quick-drying-paints-and-primers.htm https://www.starpaints.in/quick-drying-paints-and-primers.htm Wed, 05 Feb 2020 00:00:00 +0530 Thinner https://www.starpaints.in/thinner.htm https://www.starpaints.in/thinner.htm Thu, 23 Jan 2020 00:00:00 +0530 Varnish https://www.starpaints.in/varnish.htm https://www.starpaints.in/varnish.htm Thu, 23 Jan 2020 00:00:00 +0530 Water Based Paint https://www.starpaints.in/water-based-paint.htm https://www.starpaints.in/water-based-paint.htm Thu, 23 Jan 2020 00:00:00 +0530 SP Rubber Coat 33 Chlorinated Rubber Primer https://www.starpaints.in/sp-rubber-coat-33-chlorinated-rubber-primer.htm https://www.starpaints.in/sp-rubber-coat-33-chlorinated-rubber-primer.htm Wed, 05 Feb 2020 00:00:00 +0530 “SP-RUBBER COAT 33” is a single pack air drying chlorinated rubber based finish paint.  It Gives Eggshell finish, Tough, Rust Preventing Coating, Good Abrasion Resistance, Good Chemical Resistance, Good Impact Resistance, Excellent Flexibility. It is specially designed for saline environments. This product is also recommended to be used during monsoon season or cold temperature but not to be applied under running water.   Features:   Quick drying property. Recommended for the use in industrial environments. Suitable for exterior and interior use. Specially designed for saline environments Resistant to splash and mild chemicals. Excellent hardness and color retention property. A durable Eggshell Finish Coat. Tough, Rust preventing coating. Ease of application, can be applied by brush, roller or spray. Good resistance to impact and abrasion Good opacity and better hiding power. Can be applied  on steel, walls and other metallic surfaces.   Area of Application: Machinery equipments Drum Enamels Cabins Containers Wood Furniture Indoor walls Pipeline Metal furniture Collapsible gates, grills, gates, etc.   Direction For Use:   Surface Preparation: Surface to be painted should be dry and free from oil, grease, dust, rust and other contaminants. This can be done by wire brush, Emery Paper, Scrapping Tools.   Priming Apply 2 Coats of Primer On Surface after surface preparation with Interval of overnight. Sand the Surface and wipe it clean.  Use Chlorinated Rubber primer for this application. Other primer may also be used after consulting with us.   Top Coat Application Apply top coat ‘SP-RUBBER COAT 33 “with interval of 6-8 hours. Apply minimum 2 Coats on surface.   Application Method:   By airless spray:  Tip size: 0.38-0.46 mm Pressure: 10-13 MPa (1400-1800 p.s.i) Conventional air spray  Tip size : 015-3.33 mm Pressure: 0.3-0.4 MPa ( 43-57 p.s.i)   Roller or brush: can also be used. However, additional coats may be required to be applied to get desired DFT. This method of application is suitable at weld-seams, edges, corners, rivets, Stripe coating etc   Special Instruction:   Do not apply the paint if the temperature is less than 10 degree. Do not overthin the paint Stir well before use keep the container  tightly closed and away from direct sunlight. In case of contact with use plenty of water and take medical advice if irritation persists.     Waterproofing and Construction Chemicals https://www.starpaints.in/waterproofing-and-construction-chemicals.htm https://www.starpaints.in/waterproofing-and-construction-chemicals.htm Sat, 01 Feb 2020 00:00:00 +0530 Acrylic Polymer Bonding Agent https://www.starpaints.in/acrylic-polymer-bonding-agent.htm https://www.starpaints.in/acrylic-polymer-bonding-agent.htm Wed, 05 Feb 2020 00:00:00 +0530 SP-Bond is a Modified Acrylic Polymer specially designed for cementation composition. Cement Mortar modified with SP-Bond are hard, tough and durable. It has excellent adhesion to variety of surface such as concrete masonry, brick etc.   Advantage: It protects reinforced concrete structure when exposed to atmosphere from attack of acidic gases, chlorine ions etc. Can be used as water proofing membrane for chajjas, terrace, roof slabs, balconies. Strengthensbonding  for new concrete and repair for old concrete& plasters. Economy water proofing coating. Enhances strength and water resistance of repair mix concrete mortar. Crack resistance Less ingress of water.   Direction for use: Remove loose plaster if any all the cracks above 0.7mm width should be proper sealed. The surface should structurally sound and free from oil, grease loose particles. Mix 1.5 kg of cement (grey/white) with 1 kg of polymer thoroughly and add little quantity of water into the mixture to make homogenous liquid  paste and apply by brush or roller on the surface.   Cement Mortar with SP-Bond has excellent abrasion resistance bonding and impact strength. It has excellent waterproofing capacity and widely used for waterproofing floors, roof tops, basement etc. Mortar modified with SP-Bond has improved physical strength and superior adhesion to concrete. It can also be used for crack filling. Cement mortar with SP-Bond does not require wet curing as SP-Bond hold the water in the system Sufficient for cement curing. Mortar with SP-bond has excellent corrosion resistance which protect rusty as well as clean metal. The pot life of cement mortar with SP-BOND is 4 hours SP-Coat Acrylic Base Polymer Coating https://www.starpaints.in/sp-coat-acrylic-base-polymer-coating.htm https://www.starpaints.in/sp-coat-acrylic-base-polymer-coating.htm Wed, 05 Feb 2020 00:00:00 +0530 It is a single component acrylic base polymer with special additive. It has very good bonding property. It protects atmosphere exposed reinforced concrete structure from attack of acidic gases and chlorine ion. It can be used as water proofing membrane of chajjas, balconies, terraces, roof slab. The coating is especially  suitable for use in area of coastal and marine environment and can be used in all types of structure for existing and new concrete. The coating provides seem less resilient and flexible water proofing which is seem less for reservoirs, roofs and water tanks.   Direction for use:   Remove loose plaster if any all the cracks above 0.7mm width should be proper sealed. The surface should structurally sound and free from oil, grease loose particles. Mix 1.5 kg of cement (grey/white) with 1 kg of polymer thoroughly and add little quantity of water into the mixture to make homogenous liquid  paste and apply by brush or roller on the surface.   Advantage:  It has good excellent water resistance , excellent weather ability hence, suitable for exterior application being cementetious it has similar expansion as concrete it non-toxic user friendly and low cost. It protects reinforced concrete structure when exposed to atmosphere from attack of acidic gases, chlorine ions etc. Can be used as water proofing membrane for chajjas, terrace, roof slabs, balconies. Can be used as water proofing for new concrete and repair for old concrete. Internal and external wall repair. Can be applied by brush and roller.     SP-35 Acrylic Base Polymer Coating Paint https://www.starpaints.in/sp-35-acrylic-base-polymer-coating-paint.htm https://www.starpaints.in/sp-35-acrylic-base-polymer-coating-paint.htm Wed, 05 Feb 2020 00:00:00 +0530 It is similar to that of SP-COAT but economical. It can be applied on horizontal and vertical walls where no continuous leakage is visible. Can be applied on damp areaIt is a single component acrylic base polymer with special additive. It has good bonding property. It can be used as water proofing membrane of chajjas, balconies, terraces, roof slab. Can be used in all types of structure for existing and new concrete. The coating provides seem less resilient and flexible water proofing which is seem less for reservoirs, roofs and water tanks.   Direction for use: Remove loose plaster if any all the cracks above 0.7mm width should be proper sealed. The surface should structurally sound and free from oil, grease loose particles. Mix 1.5 kg of cement (grey/white) with 1 kg of polymer thoroughly and add little quantity of water into the mixture to make homogenous liquid  paste and apply by brush or roller on the surface.   Advantage:  It has good excellent water resistance , excellent weather ability hence, suitable for exterior application being cementetious it has similar expansion as concrete it non-toxic user friendly and low cost. It protects reinforced concrete structure when exposed to atmosphere from attack of acidic gases, chlorine ions etc. Can be used as water proofing membrane for chajjas, terrace, roof slabs, balconies. Can be used as water proofing for new concrete and repair for old concrete. Internal and external wall repair. Can be applied by brush and roller.   SP-EMB Elastomeric Membrane Bituminous Polymer https://www.starpaints.in/sp-emb-elastomeric-membrane-bituminous-polymer.htm https://www.starpaints.in/sp-emb-elastomeric-membrane-bituminous-polymer.htm Wed, 05 Feb 2020 00:00:00 +0530 EMB is ready to use bituminous emulsion waterproof and protective coating. It is high Performance waterproof coating that dries to tough impermeable coating.   Advantage:  Easy and direct (cold applied) application, no pre heating required. Corrosion resistance and vapour barrier. Provides waterproofing membrane that protect concrete structure and brick foundation against chlorides & Sulphate ions present in soil & water. Excellent UV resistant. Elobgation 400-500% Ideal for swimming pool, water tank, terrace etc.   Direction for Use: Application surface must be clean & free from dust, grease and loose particle. The surface may be damp but not saturated. The material should be stir well before use. It is recommended that 1 to 3 coat should be applied depending upon degree of protection required. It can be applied by brush, roller & spray.   Uses: It is useful as protective coating on concrete brick foundation retaining wall, timber, metal etc. It provides sandwich membrane in a new construction surface and treatment on existing floors, damproofing of regular surface like concrete, asbestos. It provides a key for plastering on different surfaces. For waterproofing & protection of structure concrete columns & Beams.   Equivalence: This product is unique and not equivalent to any other product in the market.   SP-GUARD Elastomeric White Coating https://www.starpaints.in/sp-guard-elastomeric-white-coating.htm https://www.starpaints.in/sp-guard-elastomeric-white-coating.htm Wed, 05 Feb 2020 00:00:00 +0530 SP-Guard is a single component liquid applied highly Resilient Water Proofing system based on a newly develop Plasticized and blended with water repellent additive Acrylic Resin with U.V Resistance Pigment. It Cure at room Temperature to form an Elastomeric seamless tough membrane. It is water base Elastomeric Waterproofing White Coating.   Advantage:   SP-Guard is a single component compound and ready to use from container after diluting with normal water, no catalyst is necessary as it is self cure when exposed. It is cold can be applied by brush, spray, roller, squeegee. It does not create mess and objectionable odor. It provides seamless (no joint) waterproofing membrane. It has thixotropic consistency and may be use on vertical as well as horizontal surface. Superior Flexibility and Elongation properties of ‘SP-GUARD’ allow expansion with the substrate without cracking or becoming Brittle. It is nonflammable, nontoxic and environmentally safe. It is also available in white, grey, terracotta and brick red shades as per requirement.    Direction for Use: All surface must be clean and free from oil, dirt, grease and other contaminants which will interfere with adhesion. Voids and Space with diameter and depth of more than 1mm should patch with crack filler except for nonmoving shrinkage cracks and all other crack & joints must be sealed with approved elastomeric sealant and repair mortar. All cracks and control joints must be reinforced by 4 inches wide strip of gloss cloth tape in wet SP-GUARD which is brush evenly over the cracks and joints in a width 125mm and the thickness of 5mm wet.     Precaution: Do not apply over wet surfaces and over free standing water.   Packing: 20kg Plastic Bucket with liner.   Equivalence: This product is equivalent to Raincoat from Dr. Fixit. SP-Plast (LW +) Water Proofing Chemicals https://www.starpaints.in/sp-plast-lw-water-proofing-chemicals.htm https://www.starpaints.in/sp-plast-lw-water-proofing-chemicals.htm Mon, 16 Mar 2020 00:00:00 +0530 SP-PLAST is an integral liquid waterproofing compound for concrete & plaster. It is specially formulated waterproofing compound which has plasticizing agents, polymers & additives. It is designed as an adhesive for cement concrete, mortor & plasters. It makes concrete cohesive thus prevents segregation. Advantage:  Corrosion Resistant- Makes concrete more cohesive hence protects steel better against corrosion. Compatibility- Being a liquid, easily dispersible & compatible with concrete / mortor mixes. Permeability- It reduces permeability of water into concrete. Strength- The setting time & comprehensive strength of concrete remains within the specifications limit. Shinkage- Reduces Shinkage crack development. Durability- Increase durability as it makes concrete more water resistant.   Direction for Use:   Charge Cement & aggregates to concrete mixer as per the mix design, Mix in dry state for 1 to 2 minutes. Start Addition of 75-80% of water & mix for 2 to 3 minutes. SP-Plast is then added as per recommended dosage in the remaining amount of water, the add it in mortar. Apply concrete or plaster as needed. Cure the applied mortar or concrete as per good construction practices.   Area Of Application: WaterProofing of concrete and sand-cement mortars used in- Basements Roof slabs & screed Water tank and water retaining structures External plastering Bathroom & Balconies Sumps & drains.   Precautions:  Do not add SP-Plast directly to dry cement & aggregate mixtures. Maintain water- cement ratio as low as possible Do not dosage of SP-PLAST as per recommended.     SP- Rubber Int Primo 33 Chlorinated Rubber Primer https://www.starpaints.in/sp-rubber-int-primo-33.htm https://www.starpaints.in/sp-rubber-int-primo-33.htm Wed, 05 Feb 2020 00:00:00 +0530 “SP-RUBBER INT PRIMO 33” is a single pack air drying chlorinated rubber based intermediate primer cum finish paint . it comes in 2 color. Grey- titanium base & brown – mecacious iron oxide base.  It Gives matt  finish, Tough, Rust Preventing Coating, Good Abrasion Resistance, Good Chemical Resistance, Good Impact Resistance, Excellent Flexibility. It is specially designed for saline environments. This product is also recommended to be used during monsoon season or cold temperature but not to be applied under running water. It provides grip to finish coat and helps in increasing covering of final coat.   Features: Quick drying property. Recommended for the use in industrial environments. Suitable for exterior and interior use. Specially designed for saline environments Resistant to splash and mild chemicals. Excellent hardness and color retention property. Tough, Rust preventing coating. Ease of application, can be applied by brush, roller or spray. Good resistance to impact and abrasion Good opacity and better hiding power. Can be applied  on steel, walls and other metallic surfaces.   Area of Application: Machinery equipments Drum Enamels Cabins Containers Wood Furniture Pipeline Metal furniture Collapsible gates, grills, gates, etc.   Direction For Use:   Surface Preparation: Surface to be painted should be dry and free from oil, grease, dust, rust and other contaminants. This can be done by wire brush, Emery Paper,Scrapping Tools.   Priming: Apply 2 Coats of “SP- RUBBER PRIMO 33” primer On Surface after surface preparation with Interval of overnight. Sand the Surface and wipe it clean. Intermediate coat   Top Coat Application :   Apply top coat ‘SP-RUBBER COAT 33 “ is recommended with interval of 6-8 hours. Apply minimum 2 Coats on surface.   Application Method   By airless spray  Tip size: 0.38-0.46 mm Pressure: 10-13 MPa (1400-1800 p.s.i) Conventional air spray : Tip size : 1.5-3.33 mm Pressure: 0.3-0.4 MPa ( 43-57 p.s.i) Roller or brush: can also be used. However, additional coats may be required to be applied to get desired DFT. This method of application is suitable at weld-seams, edges, corners, rivets, Stripe coating etc.   Special instruction:   Do not apply the paint if the temperature is less than 10 degree. Do not overthin the paint Stir well before use keep the container  tightly closed and away from direct sunlight. In case of contact with use plenty of water and take medical advice if irritation persists.