919892623358 919892623358


SP-GUARD Elastomeric White Coating


SP-GUARD Elastomeric White Coating

Product Details

Colour White
Consistency Smooth and Thixotropic
Specific gravity 1.25 +/- 0.02 kg/ltr
Thickness coat Approx. 1mm of wet film
Curing time 48 hours
Solid content 55 +/- 0.05
Elongation Approx. 400%
Coverage 0.5 to 1 square meter/kg/coat at 1mm DFT depending upon surface profile.
Method of Application By Brush, Roller, Spray, Squeegee.

SP-Guard is a single component liquid applied highly Resilient Water Proofing system based on a newly develop Plasticized and blended with water repellent additive Acrylic Resin with U.V Resistance Pigment. It Cure at room Temperature to form an Elastomeric seamless tough membrane. It is water base Elastomeric Waterproofing White Coating.

 

Advantage:

 

  • SP-Guard is a single component compound and ready to use from container after diluting with normal water, no catalyst is necessary as it is self cure when exposed.

  • It is cold can be applied by brush, spray, roller, squeegee. It does not create mess and objectionable odor. It provides seamless (no joint) waterproofing membrane.

  • It has thixotropic consistency and may be use on vertical as well as horizontal surface. Superior Flexibility and Elongation properties of ‘SP-GUARD’ allow expansion with the substrate without cracking or becoming Brittle.

  • It is nonflammable, nontoxic and environmentally safe. It is also available in white, grey, terracotta and brick red shades as per requirement. 

 

  • Direction for Use:

    • All surface must be clean and free from oil, dirt, grease and other contaminants which will interfere with adhesion.

    • Voids and Space with diameter and depth of more than 1mm should patch with crack filler except for nonmoving shrinkage cracks and all other crack & joints must be sealed with approved elastomeric sealant and repair mortar.

    • All cracks and control joints must be reinforced by 4 inches wide strip of gloss cloth tape in wet SP-GUARD which is brush evenly over the cracks and joints in a width 125mm and the thickness of 5mm wet.

     

     

    Precaution:

    Do not apply over wet surfaces and over free standing water.

     

    Packing:

    20kg Plastic Bucket with liner.

     

    Equivalence:

    This product is equivalent to Raincoat from Dr. Fixit.


Yes! I am interested

Submit Your Requirement





Looking for "SP-GUARD Elastomeric White Coating" ?