919892623358 919892623358

SP- Rubber Int Primo 33

SP- Rubber Int Primo 33 Chlorinated Rubber Primer

Business Type : Manufacturer, Exporter, Supplier

Product Details

Colour As per Sample
Finish Smooth & Eggshell
Viscosity By Ford cup no. B4 180 +/- 5 sec
Solid Content Approx. 60% By Volume
Flash Point Not Below 30 degree centigrade.
Recommended DFT 70 +/-5 Microns per coat
Covering Capacity 90-120 Sq. ft./ ltr/ 2 coats at 35 micron DFT
Grinding +7 on Hegmen Gauge
Specific Gravity 1.35 +/- 0.1 kg/ltr.
Method of Application Brush / Spray/ Roller
Recommended Thinner SP-C.R Thinner
Re-Coating Period Not more than 4 hours
Self Life Minimum 12 Months Provided components are unmixed and store in sealed container
Storage Store in cool dry place
Disposal Dispose in land filling and not in drain or any water canal
Resistance to Acid Passes the Test
Resistance to Alkali Passes the Test
Resistance to water Passes the Test
Pack offered 20 Ltr.
Brand Name Star Paints

Preferred Buyer From

Location Anywhere in India

“SP-RUBBER INT PRIMO 33” is a single pack air drying chlorinated rubber based intermediate primer cum finish paint . it comes in 2 color. Grey- titanium base & brown – mecacious iron oxide base.  It Gives matt  finish, Tough, Rust Preventing Coating, Good Abrasion Resistance, Good Chemical Resistance, Good Impact Resistance, Excellent Flexibility. It is specially designed for saline environments. This product is also recommended to be used during monsoon season or cold temperature but not to be applied under running water. It provides grip to finish coat and helps in increasing covering of final coat.



  • Quick drying property.
  • Recommended for the use in industrial environments.
  • Suitable for exterior and interior use.
  • Specially designed for saline environments
  • Resistant to splash and mild chemicals.
  • Excellent hardness and color retention property.
  • Tough, Rust preventing coating.
  • Ease of application, can be applied by brush, roller or spray.
  • Good resistance to impact and abrasion
  • Good opacity and better hiding power.
  • Can be applied  on steel, walls and other metallic surfaces.


Area of Application:

  • Machinery equipments
  • Drum Enamels
  • Cabins
  • Containers
  • Wood Furniture
  • Pipeline
  • Metal furniture
  • Collapsible gates, grills, gates, etc.


Direction For Use:


  • Surface Preparation: Surface to be painted should be dry and free from oil, grease, dust, rust and other contaminants. This can be done by wire brush, Emery Paper,Scrapping Tools.


  • Priming: Apply 2 Coats of “SP- RUBBER PRIMO 33” primer On Surface after surface preparation with Interval of overnight. Sand the Surface and wipe it clean.
  • Intermediate coat


Top Coat Application :


Apply top coat ‘SP-RUBBER COAT 33 “ is recommended with interval of 6-8 hours. Apply minimum 2 Coats on surface.


Application Method


By airless spray

 Tip size: 0.38-0.46 mm

Pressure: 10-13 MPa (1400-1800 p.s.i)

Conventional air spray :

Tip size : 1.5-3.33 mm

Pressure: 0.3-0.4 MPa ( 43-57 p.s.i)

Roller or brush: can also be used. However, additional coats may be required to be applied to get desired DFT. This method of application is suitable at weld-seams, edges, corners, rivets, Stripe coating etc.


Special instruction:


  • Do not apply the paint if the temperature is less than 10 degree.
  • Do not overthin the paint
  • Stir well before use
  • keep the container  tightly closed and away from direct sunlight.
  • In case of contact with use plenty of water and take medical advice if irritation persists.


Yes! I am interested

Submit Your Requirement

Looking for "SP- Rubber Int Primo 33 Chlorinated Rubber Primer" ?