919892623358 919892623358


Thinner


SP CR Thinner
Send Enquiry

Product Details

Appearance Colourless liquid or little yellowish
Gloss NA
Flash Point Not Below 30 Degree Centigrade
Thinning Recommendation 10 -20 % may be added depending upon product type, temperature, viscosity of product
Shelf Life 12 Months from Date of manufacturing if stored in sealed pack condition.

Details :

  • SP-C.R THINNER is a clear water white or little yellowish type liquid best formulated to be used with C.R BASED Primer, intermediate coats and top coats paints to thin and to improve flow ability, brush ability, spray characteristics and film appearance.
  • Compatible with C.R BASED primer
  • Compatible with C.R BASED paints
  • Compatible with C.R BASED intermediate coats.
  • Improves spray characteristics
  • Can be used for cleaning equipment, brush,spray, hand after paint application


Direction for use :
SP-C.R THINNER should be added before Application to adjust viscosity until desired viscosity is achieved. It must not be used with other paint type like EPOXY PAINT, P.U PAINT.

Application Guidelines :

  • Recommended application condit...

Read More...


Yes! I am interested


SP Epoxy Thinner
Send Enquiry

Product Details

Appearance Colourless liquid or little yellowish
Gloss NA
VOC (ASTM) 880 g/ltr
Flash Point Not Below 30 Degree Centigrade
Shelf life 12 Months from Date of manufacturing if stored in sealed pack condition.

Description :

  • SP-EPOXY THINNER is a clear water white or little yellowish type liquid can be used with epoxy primer, intermediate coats and top coats paints to thin and to improve flow ability, brush ability, spray characteristics and film appearance.
  • Compatible with epoxy primer
  • Compatible with epoxy paints
  • Compatible with epoxy intermediate coats.
  • Improves spray characteristics.


Direction for use :
SP-EPOXY THINNER Must be added after mixing base and hardener in appropriate ratio until desired viscosity is achieved . It must not be used in premixed epoxy system after they have reached pot life.

Note : All products and components should be placed in ambient condition of 15-30 degree centigrade for at least 24 hours prior to mixing and application.

Read More...


Yes! I am interested


SP GP Thinner
Send Enquiry

Product Details

Appearance Colourless liquid or little yellowish
Gloss NA
Flash Point Not Below 30 Degree Centigrade
Thinning Recommendation 10 -20 % may be added depending upon product type, temperature, viscosity of product
Shelf life 12 Months from Date of manufacturing if stored in sealed pack condition.

Description :

  • SP-G.P THINNER is a clear water white or little yellowish type liquid can be used with ALKYD BASED Primer, intermediate coats and top coats paints to thin and to improve flow ability, brush ability, spray characteristics and film appearance.
  • Compatible with Enamel primer
  • Compatible with Enamel paints
  • Compatible with Enamel intermediate coats
  • Improves spray characteristics
  • Economical Thinner
  • Can be used for cleaning equipment, brush,spray, hand after paint application


Direction for use:
SP-G.P THINNER Must be added before to adjust viscosity until desired viscosity is achieved. It must not be used with other paint type like C.R PAINT, EPOXY PAINT, PU PAINT.

Application Guidelines :
Recommended application condition ...

Read More...


Yes! I am interested


SP QD Thinner
Send Enquiry

Product Details

Appearance Colourless liquid or little yellowish
Gloss NA
Flash Point Not Below 30 Degree Centigrade
Thinning Recommendation 10 -20 % may be added depending upon product type, temperature, viscosity of product
Shelf life 12 Months from Date of manufacturing if stored in sealed pack condition.

Description :

  • SP-Q.D THINNER is a clear water white or little yellowish type liquid best formulated to be used with QUICK DRYING Primer, intermediate coats and top coats paints to thin and to improve flow ability, brush ability, spray characteristics and film appearance.
  • Compatible with QUICK DRYING primer
  • Compatible with QUICK DRYING paints
  • Compatible with QUICK DRYING intermediate coats.
  • Improves spray characteristics.
  • Can be used for cleaning equipment, brush,spray, hand after paint application.


Direction for use :
SP-Q.D THINNER should be added before Application to adjust viscosity until desired viscosity is achieved. It must not be used with other paint type like EPOXY PAINT, P.U PAINT, C.R PAINT.

Application Guidelines :
Recommend...

Read More...


Yes! I am interested




Looking for Product Name ?